Intercom audio spectrum

connecting…
Release the button to relock; automatic cutoff after 5 seconds.
440 Hz
Output off
Allow microphone access, then hold to send voice to the ESP32.
Play the bundled test clip through the intercom.
waiting for audio stream…
packet size: Browser playback is off.
40 dB Connecting to ESP32…
40 dB Connecting to ESP32…
0 dB Connecting to ESP32…
Doorbell capture tone Connecting to ESP32…
500 ms
440 Hz
−52 dBFS
Unlock capture tone Connecting to ESP32…
250 ms
440 Hz
−52 dBFS
Playback only, including 50/60 Hz hum; the spectrum remains raw.
90%
18 dB
20
Connecting to ESP32…
Create manual notch group
1 Waiting for ESP32 settings 50 Hz spacing through 24 kHz; Q sets width at 50 Hz
ESP32 settings profile

Includes NVS-backed device gains, notch filters, and capture tones. Export records current live values, which may differ from values saved in ESP32 NVS. If firmware cannot report a setting, the profile marks it unavailable and import leaves it unchanged.

Export reads the current ESP32 settings; importing requires firmware that supports all profile settings.
noise floor: – Δ vs ref: –
peaks: –
TX comb: –
legend: — live — peak hold — reference ┆ TX comb